Disclaimer

The content of this material are challenges faced onsite and how I personally resolved them. Please be noted that solutions posted here

1> should not be considered as ultimate. The material may be considered for reference only.

2> should not be considered as guarantee that solutions may work. Contact Cyberoam support before making any changes.

3> blog does NOT belong to the Cyberoam. It's a blog...a personal blog.

Changes done after referring this site may seriously damage the network. So...

........DO CHANGES AT YOUR OWN RISK

(please contact cyberoamsupport before implementing any changes)

Thursday 13 March 2014

How to check IPSec - Phase 2 logs in Cyberoam

Mar 13 19:53:33 "VPN_1-5"[7] xx.yy.zz.aa #1780: responding to Quick Mode {msgid:6fbca545}
Mar 13 19:53:33 "VPN_1-5"[7] xx.yy.zz.aa #1780: transition from state STATE_QUICK_R0 to state STATE_QUICK_R1
Mar 13 19:53:33 "VPN_1-5"[7] xx.yy.zz.aa #1780: STATE_QUICK_R1: sent QR1, inbound IPsec SA installed, expecting QI2
Mar 13 19:53:33 "VPN_1-5"[7] xx.yy.zz.aa #1780: Dead Peer Detection (RFC 3706): enabled
Mar 13 19:53:33 "VPN_1-5"[7] xx.yy.zz.aa #1780: transition from state STATE_QUICK_R1 to state STATE_QUICK_R2
Mar 13 19:53:33 "VPN_1-5"[7] xx.yy.zz.aa #1780: STATE_QUICK_R2: IPsec SA established {ESP=>0xc3d2c8ac <0x58bb2aa2 xfrm=AES_128-HMAC_MD5 NATD=xx.yy.zz.aa:4500 DPD=enabled}

Mar 13 20:53:33 "VPN_1-1"[7] xx.yy.zz.aa #1760: received Delete SA(0xc3d2c8ac) payload: deleting IPSEC State #1780


1780 is connected and after an hour phase 2 negotiated..and generated delete SA for the 1780
Posted by at No comments:
Labels:
Subscribe to: Posts (Atom)